Products >Modules >PN5000 Sample Injectors >PN5300 Auto Injector >Specifications

PN5300 Auto Injector

PN5300 Auto Injector

Environm. Temp.:



20-80% rel. Humidity


300 x 575 x 360 mm


21 kg

Power Requirements:

95-240 V, 50-60 Hz

Viscosity Range:

0.1 - 5 cP


RS232C; option TCP/IP


2 TTL in; 1 relay out

Sample Capacity:

2 Micro Titer plates according to SBS standards; 96-well high/low and 384-well low formats, 48-vial or 12-vial trays; any combination of plates is allowed, except for 384 low left and 96 high right side; standard 1.5 mL chromatography vials with/without inserts, 10 mL prep vials and small Eppendorf tubes can be used. Maximum vial/plate height is 47 mm overall. Automatic missing vial or well plate detection via internal sensor.

Loop Volume:

1-5000 µL program mable, 10 mL loop optional

Dispenser Syringe:

500 µL standard syringe, 2500 µL for prep option

Injection Valve:

Electrical switching time < 100 ms

Piercing Precision Needle:

± 0.6 mm

Wash Solvent:

Integrated wash solvent bottle

Wetted Parts:

SS316, PTFE, Tefzel, Vespel, Glass, Teflon, Peek; can vary with model metall-free etc.

Injection Cycle Time:

< 60 sec in all injection modes with injection volume < 100 µL including 300 µL wash.

Injection Modes:

Full loop, partial loopfill and µL pickup mode, pressure-assisted sample aspiration


RSD < 0.3 % for full loop injections (at 1.0 cP)
RSD < 0.5 % for partial loopfill injections (10 µL Vol.)
RSD < 1.0 % for µL pick-up injections (10 µL Vol.)

Sample Tray Cooling:

Built-in Peltier Range 4°C up to ambient -3°C

Sample Tray Cooling/Heating:

Built-in Peltier cooling/heating 4°-40°C

Prep Kit:

2.5 mL syringe; prep. valve; 10 mL sample loop; LSV needle; 24 pcs of 10 mL vials 2 prep sample trays, injection volume 1 µL up to 19.999 µL in 1 µL increments.